Heating System & Furnace Repair San Diego

Heating System & Furnace Repair, Replacement, Installation, and Maintenance

Your heating system can be one of the most important factors in determining your home’s energy efficiency—that’s why it’s so important to have well-maintained HVAC equipment!

At Action Air, we have nearly four decades of experience repairing, replacing, installing, and maintaining home heating systems such as furnaces, heat pumps, dual fuel systems, and all types of forced air heating systems. No matter what your heating service needs are in the San Diego, CA area, our knowledgeable technicians have you covered. Contact us on the web or call us today at
800-400-4152 to schedule an appointment or learn more about how Action Air can improve the lifespan of your HVAC equipment!

Furnace Install Services

When the temperature drops, nothing keeps your home more warm and comfortable than a well-maintained furnace – and no one keeps it performing better than Action Air Conditioning, Heating & Solar! If you live in the San Diego, California area – including southern Riverside County and North County – and need installation, furnace repair in Rancho Bernado, or replacement, contact Action Air today.

Furnace Installation San Diego

The overall performance, efficiency, and lifespan of a furnace are determined not only by the quality of the product but also the expertise of the furnace install company. If your furnace is improperly sized or installed, your system may require more frequent maintenance and repair and can even have a reduced lifespan. Action Air has been installing furnaces in the San Diego area since 1975, and we can accurately size and install a system that is ideal for your home when the temperatures drop in Southern California.

Furnace Installation & Maintenance San Diego

The best way to make sure your furnace will reliably heat your home all winter long is to have regular maintenance. This will ensure all important components of your furnace system are in good working order and reduce the need for repairs. If you have not had routine furnace service performed this season, contact Action Air today to schedule your furnace inspection before the winter heating season arrives.

If your furnace has stopped working or if a problem is uncovered during a maintenance check-up, Action Air provides quality Ramona furnace repairsheater repair in Riverside, CA and heater repair in San Diego, CA, area. If you need furnace repair, don’t put it off – contact Action Air today. Delaying necessary repairs can put your AC at risk of long-lasting damage that could result in the need for a furnace replacement.

Furnace Repair San Diego

Most Common Furnace Issues And What To Do About Them

When the cold winter weather comes, you don’t want to have to look for an emergency furnace repair company and spend several nights freezing in your sleep. A furnace may be the last thing on your mind, especially during the summer, but neglecting is guaranteed to cause numerous issues down the line.

Ask anyone working for any of the best heating repair companies in San Diego and they will tell you that there are several issues that come up more frequently than others. Knowing to recognize these issues might help prevent other serious problems that might follow as a result of neglect.

You Neglected Furnace Maintenance

One of the most frequent issues that lead to furnace issues is lack of maintenance. Not having a professional heater repair company inspect and clean your furnace at least once a year, you could experience a variety of issues. Some of those issues include sudden breakdowns and inefficiency, which lead to loss of comfort and increased electrical bills.

During routine maintenance, a heating repair company like Action Air Conditioning, Heating & Solar will inspect all the key components of your furnace and tune them up to ensure they are performing optimally. This will ensure that your furnace is not only effective and functional but also safe to use as they eliminate any issues such as Carbon Monoxide leaks or burst pipes.

Clogged and Dirty Air Filters

Regularly replacing or cleaning the air filter is absolutely necessary if you want your furnace to operate optimally. If your air filter is dirty or clogged, the warm air cannot pass freely. This means that your room will not be as warm as you might have liked it. Furthermore, the furnace will put in extra work to achieve the desired temperature, which will reflect in your electrical bill.

Something Is Obstructing the Air Flow

There are other issues that may prevent the airflow apart from the air filter. The problem can be caused by a malfunctioning fan motor, belt or overheating. The result, in any case, is the same: your furnace will struggle to achieve the desired temperature, which may lead to a set of other issues.

Thermostat Issues

In a lot of cases, the cause behind a furnace malfunction can be caused by thermostat issues. If the thermostat wasn’t correctly set, it could affect its performance. This is a common issue with modern, programmable types of thermostats. If you last set it up during the spring and didn’t remember to set the correct program before the winter, this might be causing the furnace to not heat your room properly.

Wear & Tear

Even if your furnace seems sturdy on the outside, the inside of the furnace has seen quite a lot of action that may have caused wear and tear damage. Any mechanical device is prone to breakdown, which is why your furnace might need a tune-up now and then. The only way to ensure one broken part does not affect another is to schedule regular furnace repair & maintenance.

The Furnace Is Too Loud

In most cases, a furnace will let you know that there’s an issue that requires your attention. Usually, if it’s not working properly, the furnace will emit loud noises that are very hard to miss. If you hear any squeaking, rumbling or rattling sounds coming out of your furnace, consider looking for “heating repair near me” on Google.

Heating Repair San Diego

How Much To Repair My Furnace?

When talking about furnace repair, there are a couple of different factors that determine the price of the service. First of all, there’s a significant price difference between a scheduled and emergency furnace repair, the latter being more expensive due to the immediate nature of the service.

If your furnace is still under warranty, most of the parts of your furnace will probably be covered. However, you will still have to cover the labor cost for the heater repair expert who came out to repair your furnace.

If your furnace is not covered by a warranty, the cost will depend on the component that has malfunctioned. Some issues like the ones involving the fan, motor or wiring may be more expensive due to the fact that these parts are more expensive to replace. Another huge factor that will determine the price is the age, size, and condition of your furnace.

Finally, if your furnace is more than 10 years old or the cost of repairing it exceeds $2000, you should consider replacing your furnace altogether.

How To Repair A Furnace?

Now that we’ve discussed the cost, you are probably wondering whether you should try and fix your malfunctioning furnace yourself. The answer to this, in most cases, is negative. A furnace contains a lot of electric and heating elements, which if not handled properly could lead to severe injuries and even have a fatal outcome.

That said, there are some things you can try and fix yourself before calling in a professional heating repair service. Based on the common issues we’ve previously discussed here are some steps you can take before you ask for expert help.

  • Check if the temperature on the thermostat is higher than the room temperature. Make sure the batteries in your programmable thermostat are charged and that the mode is set to “heat”.
  • Make sure the emergency switch is on. The switch is usually located on the side of the furnace.
  • Make sure that the circuit breaker isn’t tripped or the fuse hasn’t burned out. If this was the issue and it repeats again, make sure to call a heating repair expert, as there could be a short circuit inside the furnace tripping the circuit breaker.
  • Electric ignition furnaces have a series of safety steps that have to be checked before the furnace ignites. The instructions are usually located on the blower door or inside of the burner. Make sure you follow these instructions or risk causing an explosion.
  • Do not disconnect any pipes when inspecting the gas supply. This should be performed by a qualified technician.
  • Make sure PVC pipes outside of the building aren’t clogged. Any obstruction may cause the furnace to shut down.
  • In case your furnace powers on and off constantly, the dirt from extended use may be causing the issue. In this case, you need to clean the furnace and oil the motor or the blower.
  • If the furnace is producing loud rumbling sounds, there could be a loose access panel, dirty burner or worn out belt. Make sure you tighten the panels and replace the belt to see if this fixes the issue.