Save Money on Heating in Winter: Tips & Tricks

How to save money on heating during winter When the days get colder, it’s common comfort to come back to a chilly house and turn on the heater the rest of the night. However, this daily comfort to combat the cold can come with a higher bill. Your utility expenses can be steeper in the winter, especially if your home doesn’t receive as much installation or you live in more temperamental weather areas such as Murrieta or Temecula. 

The good news is that you can lower the costs of heating with some handy tips and tricks recommended by top heating contractors serving South Riverside, San Diego and Orange Counties. 

When you understand what influences your heating expenses, you’ll have an easier time figuring out what to do to lower them. Keep reading to find out what factors may have the biggest impact on your utility bills and how to save up during winter.

How to save money on heating during winter?

If you feel like you’re spending too much on heating, there may be many effective and simple solutions to this problem. For example, you may accidentally be using too much energy, which is rather straightforward to fix. 

On the other hand, the issue may require a more extensive intervention, such as if you have poor insulation or another structural issue with your house or have an outdated HVAC system. In any case, you can only benefit from solving the problem because this will spare you additional money losses further down the line.

Here are some of the most frequent causes of high heating bills and effective ways to reduce them.

Ongoing maintenance

As part of your yearly appointments, a team of trained experts will inspect and clean all the components of the system. This is an investment into the future of your HVAC because it comes with a wide range of benefits. 

Preventative maintenance will minimize the chances of serious malfunctions, but that’s not all. With a fully functional system maintained by certified technicians, you’ll be sure that you’re making the most out of it. This way, your heating will be operating at an optimal level, heat losses will be reduced, and you’ll be pleasantly surprised by a reduction in heating expenses. 

Timely repairs

If you notice that something may be wrong with your heating system, don’t brush it off because this decision could cost you dearly. It’s always advisable to call in skilled technicians to check it out, even if you aren’t completely sure that there’s a problem. This is due to the fact that small malfunctions can lead to more serious issues and even the total breakdown of the system

Typically, they also increase energy consumption, especially if the system has been in use for a long time. As their efficiency decreases, you’ll have to pay more for the heat they produce. To prevent this from happening, address ongoing issues with a professional repair as soon as you spot them.

Top-quality equipment

Systems crafted by leading manufacturers provide the user with a more dependable performance and greater longevity. Modern systems are highly energy-efficient, which means you’ll be spending less on utility bills.

The decision of choosing what HVAC system to have installed is a big one, so consider it carefully and seek the help of experienced installers. Proper installation also adds to the efficiency of your system, so make sure you put true experts in charge of it.

Minimizing heat loss

There may be areas of your home where you’re losing heat without even realizing. Air can escape through the tiniest cracks. In addition to losing warm air, chilly outdoor air could also be entering your home in these places. However insignificant this may seem to you, it can actually considerably affect indoor temperature.

Some of the most common places where you may be losing heat are doors, windows, roof, fireplace, and power outlets. It’s important for these openings to be properly sealed so they don’t emit heat and contribute to your utility bills. You should also make sure that they’re closed tightly or even locked. 

Also, try closing off the rooms you don’t use at the moment to prevent air leaks. Ducts are another possible problem area, especially if they’re located in the basement or the attic, which are typically poorly insulated. Seal them correctly to keep the heat inside.

Setting the thermostat properly

A slight adjustment to your thermostat settings can bring you major gains. Turning it down ever so slightly won’t affect your comfort level but it may lower your expenses. A great time to turn it down is when you’re going to bed and will be under the covers anyway. It’s also a good idea to do it while you’re out of the house.

Improving airflow

If you’ve been thinking of redecorating your house for a while, now may be the perfect time. Ask yourself if there are any furniture pieces blocking your vents. Then move them around so there’s nothing directly in front of the vents to allow for easier airflow. You’ll get better heat distribution and you’ll be just as warm and comfortable at a lower thermostat setting.

Where in Riverside, CA can I find an experienced heating contractor?

Where in Riverside, CA can I find an experienced heating contractor Action Air Conditioning & Heating Installation is a long-standing HVAC company with a tradition that spans more than four decades. Our NATE-certified specialists have the extensive expertise and advanced equipment to meet the rigorous demands of the industry and match your unique HVAC needs. 

We operate throughout San Diego and South Riverside Counties. It’s our goal to provide a range of quality services to local commercial and residential clients. Count on us whether your property is located in La Jolla, Escondido, Lakeside, Del Mar, or another community in the vicinity. 

Get in touch with us, explain the issues you’re experiencing, and schedule a comprehensive inspection of your heating and air conditioning system. Our skilled technicians will quickly pinpoint the cause of the malfunction and find the ebay solution for it. If you require an installation or a replacement, we’ll install your new system so it lasts for years to come. Our whole team is at your service all year around.

Heating System Malfunctions: Common Causes & Reliable Solutions

Who performs dependable heating services in Riverside County A malfunctioning heating system can cause discomfort and a stressful situation. It’s understandable homeowners be wary of potential breakdowns. In addition to the inconvenience, HVAC malfunctions can be extremely dangerous, as heating equipment is the number one culprit of U.S. residential  fires. 

Even though heating systems nowadays utilize dependable, cutting-edge technology, most of them will develop certain issues some time down the line. When this happens, you can’t let them get out of hand because they could pose a threat to your family’s well-being and safety.

Luckily, you can catch issues early and prevent further repairs using reliable heating services in Riverside, CA. Even if your heating stops working completely, experienced technicians can still take steps to identify the root cause and resolve the issue. Read on to find out what typically leads to serious heating malfunctions and effective preventative actions you can take.

What causes a heating system to stop working?

There are many factors which can cause your heating system to stop working. However, most of these problems can be addressed. Knowing how to spot the first signs of these issues and what preventative measures you can take is immensely helpful. Here are some of the most common problems that may be causing your system to fail.

1. Improper maintenance

If you haven’t paid any mind to your heating since the last time you used it, the chances are it may show signs of improper maintenance. This issue is relatively easy to resolve since it’s most likely due to the furnace being dirty or in need of a tune up. 

The furnace needs unrestricted air flow. A dirty furnace motor blower prevents free movement of air and subsequently causes the heat exchanger to overheat and break down. If your burners have stopped working, the flame sensor or the burners themselves may be in a layer of dirt. The air filter is another component which can stop functioning due to infrequent cleaning. It needs to be replaced regularly for the system to continue operating normally.

It’s advisable to schedule your furnace tune up appointments at least once a year. An experienced crew can perform basic furnace maintenance tasks quickly and efficiently. 

2. Faulty thermostat

You may notice that your thermostat doesn’t turn on the heat any longer. Although modern thermostats are rather dependable and long-lasting, as they reach the end of their lifespan, they’ll start showing signs of wear or malfunction. 

If the thermostat isn’t responding, it’s possible it will require a replacement. There’s another possibility, as well– the device may have been improperly set. If this is the case, simple re-programming will do the trick.

3. Bad blower capacitor 

The blower capacitor is a key feature of your system, as it starts the heat after you set your thermostat. If it’s past its prime, it may be worn and need a replacement. It’s best to contact experienced technicians and have them check if this is the case. They’ll diagnose the condition of the blower capacitor and replace it with a brand new component.

4. Low on refrigerant

Refrigerant allows for the movement of heat between different sets of coils in a heat pump. If there is too little of it, heat strips turn on too frequently and rack up your utility expenses. If you’ve noticed that your bills are higher than usual, this may be the reason. 

In addition, low levels of refrigerant fluid can lead to further malfunctions if they aren’t addressed in a timely manner. If they’re consistently below normal, you can expect the compressor of your heat pump to stop working eventually. 

Since recharging the level of refrigerant is pretty straightforward, it’s a kind of effort definitely worth investing in because it’ll save you from additional trouble down the line. It’s also much more cost-effective than it would be to have a compressor replacement done. 

5. Ductwork

Sometimes, although it may seem like your heater is at fault, it’s actually the ductwork that’s preventing the system from working properly. The best way to avoid such issues is to make sure your ductwork is installed by certified and experienced technicians. Poor installation practices may lead to an imbalance of airflow in the system, energy losses, and short cycling. This, in turn, can cause overheating and deterioration of the system.

Even if the installation wasn’t performed properly, the situation is probably salvageable. You can schedule an inspection by a qualified HVAC specialist and have it assessed in detail. They’ll then recommend the best course of action, which will probably include redesigning the ductwork. 

Who performs dependable heating services in Riverside County?

What causes a heating system to stop working If you’re searching for a crew of experts in heating who have the experience and practical know-how to repair different types of malfunctions, contact Action Air Conditioning & Heating Installation. Apart from diagnosing and fixing issues with your system, our team also performs a wide variety of installation and replacement services that will keep your HVAC system in mint condition throughout the year. 

We cater to the needs of residential and commercial clients in San Diego, Oceanside, Rancho Santa Fe, Carlsbad, and other areas of San Diego and South Riverside Counties. We offer a range of budget-friendly solutions to help you attain the comfortable and carefree lifestyle you deserve. Get your peace of mind back and have reliable heating at your disposal at all times with our expertise-based services. We’ll help you explore your financing options and find one that suits you.

Give us a call to schedule your in-depth inspection, find out the root cause of your HVAC problems, and have the best technicians in the area restore the functionality of your system. We’re ready to bring you top-quality customer care and HVAC services.

Leaky AC Ducts: Symptoms & Solutions

How do I know if my AC ducts are leaking Do you feel like your air conditioner is unable to cool down your home as efficiently as before? You may have inspected and changed the filters, performed routine maintenance, and adjusted your thermostat settings, but the AC still isn’t performing optimally. In this case, you may be experiencing leaky ductwork in your home.

Naturally, other problems may be the cause for inefficient or non-existent cooling, such as a broken or damaged fan motor, or a dirty and clogged AC drain line. If your AC has issues during the prime heat of Summer, whether you live in Murrieta, Menifee or Carlsbad, calling an air conditioner repair professional near you is the best way to remedy or optimize your HVAC unit.  In the meantime, it’s useful to be aware of the common warning signs of leaky ducts and explore viable solutions.

How do I know if my AC ducts are leaking?

If your air conditioner ducts are leaking every time you turn on the AC system, your home may notice your home reaching uncomfortable temperatures , while your energy bills are unusually high. To prevent this, be aware of the following common signs of leaky ducts:

1. Inefficient cooling

If your AC is unable to bring your home to comfortable temperatures, with the thermostat settings correct, it’s the first sign of your unit having issues. Damaged air ducts are a common culprit of inefficient cooling, as leaks enable the cooled air to escape your home. The best action to take in this situation is to call a trusted HVAC company to inspect your ducts and perform any necessary repairs to your cooling system.

2. Uneven cooling

If some rooms in your home don’t cool down despite your AC usage, or some rooms become too cold for comfort, it is a sign of uneven cooling. This is also a common sign of leaky ductwork. Your air conditioner should be able to evenly distribute cool air throughout your house, and duct leaks may be preventing it from doing so. However, keep in mind it’s normal for rooms on upper floors to be slightly warmer than rooms on floors below. Nevertheless, overall consistent cooling in your home can be expected from an optimized AC system.

3. High energy bills

It is normal for your energy bills to rise when the AC is run constantly throughout each day, which is common practice during the hottest months of the year. It’s a good idea to keep records of your energy consumption during different periods of the year for reference. If your bills are higher than they usually are during this time of year, it may be a cause for concern. Leaky ducts can force your AC to run for longer periods to cool your home, causing your bills to increase significantly.

4. Excessive dust

If your home is noticeably dustier than usual, it may be another sign your ducts are damaged. Leaks allow dust to enter your home and spread throughout the space more easily. Since dust can aggravate various respiratory conditions, irritate allergies and reduce your indoor comfort, you may consider immediate measures to seal any duct leaks in your home’s air conditioner system.

5. Poor air quality

In addition to making your home dusty, leaky ducts can impact your indoor air quality in a number of other ways. For instance, they may allow outside air, air from your basement or garage to spread throughout the house. This can be dangerous if  there’s any hazardous chemicals around or inside your home, such as pesticides or paint thinners.

How do you fix a leaky HVAC duct?

AC repair professionals use a variety of techniques to repair AC ducts. In most cases, the technicians will use specialized duct sealants to fix the leaks and prevent uneven cooling. Some homeowners choose to seal the leaks using special duct tape, but this practice has been largely replaced by more convenient sealing options. Moreover, Energy Star also advises against using duct tape, mainly because it doesn’t tend to last long.

Considering leaks tend to occur in hard-to-reach places, duct sealing can be a messy and often highly inconvenient job. So, contacting professionals is often the wisest option, without the risk of causing more damages. Expert technicians will inspect your ductwork carefully to detect leaks and devise a strategy to remedy the problem. They will also take the opportunity to inspect your unit for other problems and advise you on any services you might need to ensure optimal cooling.

How much does it cost to replace AC ductwork?

Ductwork replacement may be costly due to the complexity and scope of the project, although the exact cost may vary depending on the company. This is why many homeowners choose to have their ducts sealed instead. The solution you select may depend on the state of your ducts and other factors specific to your situation. For instance, it may not be the best option to install new ductwork if you plan to move in the near future, while having outdated, leaky ducts may reduce resale value if you plan to sell.

Either way, seek advice from HVAC professionals before making any decisions, as they’ll be able to offer insightful input.

Your trusted partner for air conditioner repair services in Murrieta, San Diego County and Riverside area.

How do you fix a leaky HVAC duct Action Air Conditioning Heating and Solar is here to provide efficient, reliable, and detailed repair services to homeowners in Murrieta, Wildomar, and the neighboring cities. Our dedicated technicians can help you with an array of problems, from persistent indoor AC leaks to damaged ductwork. Owing to our vast experience and unwavering commitment, we’ve become one of the most trusted AC repair and installation companies in the area.

Our services are designed to bring you optimal indoor comfort and air quality, no matter the time of year. With certified technicians at your disposal, you’ll no longer have to worry about inconvenient AC breakdowns, inefficient, or uneven cooling. Make sure to get in touch with us and enjoy year-round comfort.

Troubleshooting Your AC Fan: Tips & Tricks

What causes an AC fan to stop working Your air conditioner is crucial to your indoor home comfort, especially during the warm season. It’s inconvenient to turn on your AC in the middle of a hot summer day only to realize your AC fan is not working. To keep the temperatures in your home from rising to uncomfortable or dangerous levels, you’ll need to troubleshoot your system to locate the issue, or contact your AC repair company and a professional can drive out to your home anywhere from Chula Vista to Murrieta.

Before you attempt to troubleshoot your AC fan, be aware of what to look for and where. Assuming you own a standard central air conditioner, you’ll be able to find two fans, one inside and one outside of your home. If either of these break down, your AC won’t be able to work properly.  In this article, we’ll explore the most common culprits of fan malfunctions and discuss the most effective ways to resolve the issue. Read on.

What causes an AC fan to stop working?

Before concluding your fan motor is broken, check if other, possibly simpler problems may be to blame. In fact, a range of potential issues can occur with your AC, some of which may result in your AC fan not working.

Your central air conditioner is a complex system with many components, and there are several issues that could be the reason your AC fan is not working. Some potential culprits include:

Incorrect thermostat settings

It may be the case that your AC system isn’t cooling down your home because the thermostat is set to heat. If your AC is on but not cooling, make sure to check the settings and switch the mode to either “cool” or “auto”. You should also set a temperature that’s appropriate for the time of the year and your comfort.

Tripped circuit breaker

If you’ve made sure your thermostat settings are correct, the next step would be to check the power supply. This means checking your breaker box panel to look for tripped circuit breakers, or finding the fuse box and checking for blown fuses. In either case, you may be able to fix the issue yourself simply by switching the breaker on or replacing the fuse. However, if that doesn’t resolve the issue, make sure to contact AC technicians.

Dirty Filters

If you’re lucky, your AC fan isn’t working as a result of dirty or clogged air filters. If that’s the case, all you have to do is clean or replace the filter and your airflow should be restored.

Capacitor issues

The function of your AC capacitor is to store energy and provide power to the fan. If it breaks down for any reason, the fans are most likely to stop spinning. In this case, you’ll probably need to contact reliable AC repair technicians to take a look at the capacitor and determine whether it needs a replacement.

Contactor issues

An AC contactor is a switch that controls the fan motor of the condenser and the compressor. The contactor can break down over time, restricting the outdoor fan from functioning properly. If the contactor is to blame, you’ll also have to contact a HVAC professional.

Broken or loose belt

Older AC systems often have belt-powered fans that may break or become loose, preventing the fan from spinning. Belt issues can be fixed, but they are often a good indication that you need an AC replacement.

Burnt out fan motor

Condenser fan motors are prone to wear and tear. They may malfunction when put under a lot of strain, especially in air conditioning systems that aren’t regularly maintained. If your fan motor is broken, you’ll either need to hire someone to repair or replace it.

How do I know if my AC fan motor is broken?

If you’re worried that your air conditioner may have a bad fan motor, look for the following signs:

  • The fan keeps running even when your AC is turned off.
  • The fan doesn’t turn on.
  • The fan blades are rotating slowly.
  • The blades of the outdoor fan don’t move.
  • The condenser is making rattling noises.
  • There is no airflow coming from the unit.

If you notice any of these signs, make sure to turn off your cooling system and call a professional as soon as possible. Along with regular maintenance tune-ups, keeping an eye out for early warning signs can save you a lot of trouble and money further down the road.

How much does it cost to replace a fan motor in an air conditioner?

So, you’ve had your AC unit inspected and the technician has determined that your fan motor should be replaced. Now you’re likely wondering how much the replacement will set you back.

The prices for AC fan condensers can vary depending on your location and the contractor you choose for the installation. In general, a fan motor replacement may cost you several hundred dollars, usually somewhere close to $500.

Replacing the fan motor as soon as possible is essential for two main reasons: you won’t be able to use your AC and your compressor may be the next to break down if you attempt to run your cooling system. A compressor replacement is a much more expensive repair service, so keep that in mind.

We bring you efficient AC repair services across Murrieta

How do I know if my AC fan motor is broken Whether your air conditioning drain keeps clogging, the cooling system starts leaking indoors, or you need air duct leaks fixed, don’t hesitate to contact Action Air Conditioning Heating and Solar. We’re at your service for all kinds of HVAC repair and installation services across Murrieta and the surrounding neighborhoods in Riverside County. Our certified technicians will come to your location in no time, fully equipped to deal with any issue you may be experiencing. Reach out now and let us ensure your indoor comfort.

How to Improve Your AC Efficiency

Every homeowner struggles with this dilemma; how to find a balance between running the home’s air conditioning to keep the house comfortable and keeping the electricity bills affordable.

If homeowners choose not to use their AC at all times, the home becomes hot and uncomfortable. But if they don’t limit their use of the home’s cooling systems, there will be huge bills to pay at month’s end.

Most homeowners want an alternative that allows them to have comfortable homes without exorbitant electricity bills, says PinnaclePMC.com. This article will show you how to keep your home’s electricity bills low without sacrificing comfort in your house.

Instead of forcing you to minimize the use of the AC, this strategy focuses on making your home’s cooling units work better. This is a far more sustainable approach to keeping electricity bills manageable. Here are some tips to improve the efficiency of your AC unit.

invest in more efficient units 1.   Invest in more efficient units

If your units are old, you may be asking more from them than they can give. Older units cool less efficiently and use up more energy. New Energy Star rated air conditioners deliver more cooling while using 15% less energy than older systems. And if you buy a unit that uses hydrocarbon refrigerant mixtures instead of synthetic ones, you can save 17% to 38% of your cooling costs.

2.   Ensure the AC is the right size

If you use the unit in a room size that is larger than its cooling capacity, it will overwork itself. The machine will consume more energy to keep the space cooled, it will break down more often and the room will not be cooled properly. Conversely, an oversized unit will waste energy.

3.   Tune-up the AC

After lying idle through the winter months, your AC may not be in the best shape by summer. Before you fire up the unit, you should have a professional give it a tune-up. This will ensure that any issues that have developed with the system are found and resolved.

4.   Change the filters

Dust, pollen, and other materials in the surrounding air will get into the AC filters. Clogged and dirty filters force your AC to use up more energy and deliver less cooling. If the filters are disposable, they should be replaced, but if permanent filters, they should be cleaned.

5.   Clean around the condenser

To ensure proper airflow around the outside condenser, cut back surrounding vegetation to at least two feet from the unit. Also, remove dead leaves and any sort of litter from the area. If the AC is properly ventilated and free of debris, it will work more efficiently.

6.   Clean coil fins

If the coil fins have accumulated dirt and debris, it will reduce airflow and impair the unit’s efficiency. The fins may be cleaned using a gentle stream from the garden hose or fin cleaning spray. If there are bent fins, straighten them with a butter knife.

place the compressor in the shade 7.   Place the compressor in the shade

It is best if the compressor unit is kept in a cool and shaded area. This will prevent it from overheating. The unit will not use up excess energy trying to cool itself and the house, at the same time. An AC that is in direct sunlight can lose as much as 10% of its efficiency. 

8.   Keep indoor open and unblocked

The AC’s indoor vents should be vacuumed periodically to remove dust and debris, and help the system maintain steady airflow. Items that that block the vents – like furniture and blinds – should be removed.

9.   Keep heat sources away from the thermostat

Keeping heat-emitting objects close to the thermostat will increase the ambient temperature around the thermostat. If this happens, the thermostat will assume the room temperature is high and make the AC work harder than is necessary.

keep blinds and doors closed 10. Keep blinds and doors closed

During the day when the temperature is high, blinds and curtains should be closed. This prevents direct sunlight from getting into the room, warming it, and causing the unit to work harder. Closing doors when the AC is running will also prevent cooled air from escaping.

11. Install a ceiling fan to improve airflow

Installing a ceiling fan in the room will reduce the load on the unit because the fan will circulate cooled air to the farthest parts of the room. They will cool the room faster, reduce the strain on the unit and allow it to take more breaks.

install a programmable thermostat 12. Install a programmable thermostat

Smart thermostats regulate how the unit works according to the time of day, number of people in a room, humidity, and temperature. This keeps the AC from overworking and wasting energy. If the unit does not have a smart thermostat, you can purchase one for it.

13. Weatherproof your home

If your home is not properly weatherproofed it will work against you AC and make it work too hard. Taking steps like applying window film to tint windows, making sure the insulation in the home is working, and installing double-glazed windows, will make the home more energy-efficient.

 

AC Leaking Water Inside: What Should I Do?

Is it dangerous if the AC unit is leaking water inside the house Have you noticed a water leak on the wall near your AC? Indoor AC leaks are a common problem for homeowners, unfortunately. Depending on the cause and type of leak, you may experience more severe AC issues if the problem at hand is not addressed.

Luckily, you can rely on professional, insured, and certified air conditioning installation technicians, ready to visit your home in Murrieta, Lakeview, San Marcos, La Jolla, or anywhere in between! Read on to learn what causes indoor leaks and how you can help the situation before requesting a visit from a technician.

Is it dangerous if the AC unit is leaking water inside the house?

If your air conditioner is leaking, it’s most likely only water. Disconnected or clogged condensate drain lines, overflowing drip pans, and frozen coils often cause water to drip out of your unit.

Although it’s not as common, your air conditioner can also leak refrigerant, a cooling liquid used to reduce your indoor temperature. If you suspect that your AC is leaking refrigerant, make sure to contact an HVAC company right away.

There are some immediate steps you can take to prevent water damage and mold growth from your AC leaking only water:

  • First, turn off your AC system to stop the water flow.
  • Next, begin cleaning, soaking up, and drying the affected areas. Use a wet-dry vacuum or a Shop-Vac if you have one.
  • Call an AC repair technician to find and tackle the cause of the leak.

Why is my air conditioner leaking water inside the house?

1. Clogged condensate drain lines

As it works to cool down your home, your AC unit produces condensation which then drips down the evaporator coil and into the drain pan. The moisture is then transferred to the outdoor unit via the condensate drain line. Over time, algae, mold, grime, and other debris can build up and block the drain line, causing leaks.

2. Cracked or damaged drain pan

Corrosion can cause old AC drain pans to become brittle. Over time, rust can weaken the pan and create cracks and holes. As a result, your AC may start leaking indoors. To prevent this, you should have your AC serviced and maintained at least once a year. A qualified technician can spot specific red flags and resolve smaller issues before they get out of hand and cause extensive damage.

3. Iced over evaporator coil

The evaporator coil of your air conditioner is cold by default. However, problems may arise if the coil develops a layer of ice or frost. If there’s too much ice, it can melt off the evaporator coil, drip into the drain pan, and overflow, causing leaks. There are two common reasons for this:

  • A clogged air filter that causes poor airflow. This is why it is essential to replace your AC filters regularly.
  • Low refrigerant levels. An air conditioner that works properly has a constant level of refrigerant. However, corrosion and vibrations can cause leaks over time. When this happens, the pressure level of your system drops and causes the coil to ice over.

Since low refrigerant levels can cause serious issues with your AC, it is paramount that you contact professionals as soon as you suspect a leak.

How do I stop my AC unit from leaking water inside?

If you notice water leaking out of your indoor AC unit, the best thing you can do is contact a qualified HVAC technician. However, there are a couple of easy fixes to try.

For frozen evaporator coils:

  • Replace the filters. We recommend changing air filters every 3 months, and more frequently in the summer (once a month).
  • Clear the vents. Make sure that your air vents and registers aren’t covered or blocked.
  • Call a professional. If replacing the filters and clearing the vents doesn’t help, you may have a low refrigerant level, which requires the expertise of a professional.

For damaged or overflowing drain pans:

  • Clear out and inspect the pan. Use a wet-dry vacuum to clean the drain pan after inspecting it from all sides using a flashlight.
  • Use a water sealant. You can try to fix the drain pan temporarily using a water sealant.
  • Replace the drain pan. It’s usually best to have the damaged drain pan professionally replaced.

For clogged drain lines:

  • Clear smaller build-ups of algae, fungi, or debris by pouring a quarter cup of vinegar down the drain line.
  • Clear larger build-ups using a wet-dry vacuum. You can find a wet-dry attachment that connects with the drain line at most home improvement stores.

Most of these tips can also serve as preventative measures for indoor leaks. However, since some AC maintenance tasks require more time and effort, many homeowners choose to delegate them to experts. What’s more, scheduling a professional tune-up can also prevent more serious issues with your unit, ensuring your indoor comfort all year round.

Contact us for expert air conditioning installation and repair in Murrieta

Why is my air conditioner leaking water inside the house If you’re worried about your AC failing just before the summer, make sure to get in touch with Action Air Conditioning Heating and Solar. As a well-established HVAC repair and installation company serving Murrieta, Temecula, the rest of South Riverside, Orange, and San Diego county, Action has the experience to fix any issue with your AC system. This includes indoor and outdoor leaks, malfunctioning air conditioner fans, leaks in your HVAC ductwork, and many other common or complicated problems.

At Action Air Conditioning, Heating, and Solar, it is our goal to provide our neighbors in Murrieta and Riverside County with convenient services, high-efficiency HVAC systems, and optimal indoor air quality. Our skilled technicians are at your service whether you need AC repair, maintenance, installation, or replacement services. Count on us to employ industry-leading techniques to efficiently identify and effectively resolve your AC and heating problems.

Contact us now and get the answers to your HVAC questions and concerns so you can stay comfortable all year.

7 Steps to Clearing Your AC Drain Line

A clogged drain line is a fairly common cause of air conditioner malfunction. Luckily, it tends to be an easy issue to remedy. How do I clear my AC drain line

But what is the AC condensate drain line and why does it get clogged? What are the signs of a clogged drain? Should you call expert AC installation and repair technicians as soon as you notice them?

Of course, the safest way to prevent serious damage to your AC is to contact an HVAC professional. Whether you live in Murrieta, La Jolla or Oceanside, a certified technician can come to you to service your unit. Whether you decide to hire experts or do it yourself, you can read on to find out more about clogged drain lines.

How do I find my AC drain line?

Your AC has a condensate drain line running from the indoor to the outdoor unit. You’ll find the end of the drain line somewhere near the outdoor unit (usually a copper or white PVC pipe). As for the access point, look for a vertical pipe with a cap near the indoor unit. AC drain lines typically work by using gravity, although there are some that facilitate the drainage process via a small pump.

What are the signs of a clogged AC drain line?

The first and most obvious sign of a clogged condensate drain is your AC has stopped working. This tends to happen due to backlogs or blockages in the outdoor PVC pipe preventing the removal of excess condensation. As a result, your AC won’t be able to function properly. Other signs of a clogged drain pipe include:

  • Water dripping or flooding around your AC unit. This can be a sign of a backed-up drain pipe.
  • Water around the safety switch. If your air conditioner doesn’t work at all, the safety switch may have been triggered, causing the unit to stop working.
  • Moldy smells in your home. If dirt and debris build up inside your condensate drain line, your unit may start to smell of mold. If that’s the case, make sure to contact a professional to protect you from mold-related health issues and ensure good indoor air quality.
  • A full condensate pan. If your drip pan is full or overflowing, it may be the case that your AC isn’t draining water properly due to a clog.
  • Signs of water damage. Water damage around or under your air conditioner, on the floor, or near the fan can indicate a drain line blockage.

Why does my AC drain keep clogging?

Persistent clogging is usually caused by algae, mold, or mildew buildup in the drain line. When warm air blows over the cool evaporator coil of your AC, the condensate drain line can become quite humid, creating the perfect breeding grounds for various types of fungi and bacteria. If you use your air conditioner constantly, the risk of clogging may increase. This is one of the reasons why regular maintenance and servicing are recommended for all AC owners.

How do I clear my AC drain line?

If you discover a small clog in your AC drain line, it’s likely that you’d be able to clear it out yourself, although professionals can perform the task with more efficiency and fewer risks. If you decide to clear it yourself, we advise against using bleach, as the harsh chemicals might cause additional damage to other components of your AC.

The typical process for getting rid of algae, mold, or mildew build-ups includes: 

  • Step 1: Switch off the power to your air conditioner at the breaker and the thermostat.
  • Step 2: Locate the condensate drain line. Look for a PVC pipe located near the outdoor condenser unit. If the drain line is full, you may need to bring a bucket with you.
  • Step 3: Find the access point. The point of access on a condensate drain line is usually a T-shaped vent with a cap that covers the top of the drain line. You can remove the cap to inspect for any clogs and blockages.
  • Step 4: Inspect the drain pipe to evaluate the blockage. If it is visible, put on protective gloves and try to remove the blockage manually. If you can see it but it seems too far down, move on to the next step. NOTE: Do not push the clog further down if you can’t reach it easily.
  • Step 5: Use a vinegar solution to flush the blockage out. The acidity of vinegar gives it great cleaning properties. Once you’ve removed the cap, pour a quarter cup of white vinegar into the opening and stop when it’s full. You can also mix the vinegar with some warm water and soap if you find the smell too strong.
  • Step 6: Let the solution sit for half an hour and flush the drain pipe out using water. Make sure that the water flows normally. If not, it may mean that the blockage is too large for you to clear it yourself. Contact a qualified HVAC technician to help you.
  • Step 7: Repeat the process each month. Routine maintenance is the best way to prevent clogging and ensure the optimal performance of your air conditioning system. If this sounds like too much work, consider investing in yearly or bi-yearly AC tune-ups to keep the most common problems at bay.

Choose us for reliable AC installation and repair in Murrieta

What are signs of a clogged AC drain line Action Air Conditioning Heating and Solar is your trusted partner for air conditioning service, AC repair and replacement in Murrieta and surrounding Riverside County, Orange County and San Diego cities. Our dedicated and experienced technicians can help you with a wide range of issues, including clogged drain pipes, faulty air conditioner fans, or leaky HVAC ducts in your home. In addition to fixing AC problems, we can also prevent further damage and keep your unit running optimally by offering comprehensive maintenance services throughout the year.

We can help you across Riverside County, from Santa Rosa Plateau to Corona, so don’t hesitate to get in touch no matter your location. We are here for you for any questions or concerns. Call today to speak with our helpful representatives.

Cleaning AC Coils: Tips & Tricks

How do you clean a dirty AC coil Condenser coils in your air conditioner are one of the unit’s most vital components. They are essential in the cooling process itself. Unfortunately, air conditioner coils can become dirty, causing potentially serious issues with your air conditioner.

To avoid preventable AC repair, it is necessary to clean the coils every once in a while. In most cases, the best way to clean your coils is by hiring a professional. There are HVAC specialists available throughout your area in Corona, Menifee, Murrieta, Canyon Lake, and the rest of South Riverside. Certified technicians can perform other forms of AC maintenance in addition to coil cleaning, detect any issues or need for repairs. In this article, you will learn why it’s important to keep your coils clean and how to undertake the process.

What happens if my AC coils are dirty?

Your AC condenser coils, located in the air conditioner outdoor unit, carry refrigerant and allow it to transfer heat from your home. As the air is blown over the condenser coils, the heat is transferred to the outside air through the refrigerant. As they are located outside, condenser coils are exposed to all kinds of dirt and debris. Over time, the dirt can build up on the coils, potentially causing a variety of problems. Some of the most common issues include:

Inefficient cooling

If you allow dirt to build up on the condenser coils, the added layer will create a barrier between the heat in the refrigerant and the air being blown over the coils. This can decrease the efficiency of heat transfer. In other words, the overall efficiency of your air conditioning system will be compromised. If you notice your air conditioner isn’t cooling your home as well as it used to, dirty coils may be the culprit.

High energy bills

Due to your air conditioner’s decreased efficiency, higher energy bills are inevitable if your condenser coils to get too dirty. Essentially, your air conditioner will have to work longer and harder to cool down your home, leading to greater energy consumption and higher bills.

Expensive repairs

There is also a high likelihood of your AC breaking down if the condenser coils accumulate too much dirt and debris. To minimize the risk of coil leaks, prevent expensive repairs, and prolong your air conditioner’s lifespan, routine maintenance is a must. Make sure to hire reliable professionals to inspect and service your unit.

How do you clean a dirty AC coil?

Hiring professionals to clean your AC coils is the most effective method to ensure optimal performance without risks of mishandling components. Licensed and trained HVAC technicians have the tools and skills necessary to perform effective AC repair and service without risking further damage to your system. Here some of the most commonly used techniques for coil cleaning:

  • Use compressed air to clear lighter buildup on coils. Direct the compressed air in the opposite direction of the normal coil air flow. While doing so, watch to ensure consistent flow across the coils until the debris is cleared. Eye protection is recommended.
  • Use a soft brush to remove light dirt buildup. This method involves using the brush directly on the coils, sweeping and scrubbing away the dirt. Hard bristles and wire brushes are not advisable as they can damage your AC fins.
  • Using a commercial cleaner or a home-made detergent to carefully clean coils. For home-made detergents, experts recommend using mild detergents mixed with water in a spray bottle. The mixture can be sprayed on the coils and wiped away after a couple of minutes.
  • Using heavy-duty cleaning agents to clean heavy build-up. Professional HVAC technicians can use a pressure washer or a steam cleaner along with heavy-duty chemicals to clean heavily soiled coils. This process can sometimes involve more complex steps such as removing the coil, cutting refrigerant lines, and reassembling the system afterward.

Can I use vinegar to clean AC coils?

Yes, vinegar mixed with water is often used to clean AC coils at home. However, vinegar is usually effective only against lighter dirt build-ups. Nevertheless, you can keep your coils in good shape by mixing white vinegar and water in a spray bottle and spraying the mixture onto the coils.

If your condenser coils are greasy, you can also try adding a tablespoon of baking soda to the mix. This can be an effective way to remove dust and fight persistent grease on the coils. You can also use a mild detergent or dishwasher instead of the baking soda for even better results.

How much and when do you use vinegar for the air conditioner?

There is no exact amount and frequency for using vinegar to clean your AC coils. Still, about ¼ of a cup of vinegar will do the trick in most cases. As for the frequency, you can get good results by cleaning the coils every month or every couple of months. Naturally, cleaning the coils can be time-consuming, especially when other AC maintenance tasks are added to the solution. For convenience and reliability, most homeowners choose to leave condenser coil cleaning to professionals.

Need efficient AC repair in Corona? Contact us now

What happens if my AC coils are dirty Lack of AC maintenance can cause a range of issues, including severely clogged condensate drains, ACs dripping water inside, and even major breakdowns. If you are concerned you need an AC repair or air conditioning system service, contact HVAC experts sooner rather than later to have them inspect and clean your unit.

Homeowners in Corona and surrounding South Riverside cities can depend on Action Air Conditioning, Heating and Solar for expertise-based AC repair, maintenance, and installation services. Whether you are located near Santiago Peak or down south near Discovery Lake, you can depend on Action to provide fast-response service and expert solutions. With updated certification and years of field experience, our technicians are capable of resolving all kinds of AC concerns with precision and efficiency.

Contact Action Air Conditioning Heating and Solar to maximize your indoor comfort and minimize your energy bills. We are your service call for all your heating and cooling needs. Feel free to reach out to our professional team today.

Leaky AC Coils: Causes & Solutions

What causes an AC coil to leak Leaky evaporator coils are a common problem with air conditioners. They can be quite an inconvenience for homeowners since the decreased energy efficiency can bump up the cost of your running AC. Leaky evaporator coils can also cause damage and the need for costly repairs.

Luckily, there are several ways to prevent leaks in your evaporator coils. A first step can be reaching out to a reputable air conditioning service in Corona, Temecula, Murrieta, or your nearby city.  Routine coil maintenance is vital if you want to keep your AC running smoothly and efficiently throughout its lifespan. Keep on reading to find out what causes evaporator coil leaks and how to handle them.

What causes an AC coil to leak?

The first thing you should know is that leaky evaporator coils are a normal and common occurrence. This is due to the expanding refrigerant in the coils, which takes heat from indoor air and condenses water out of the cool air, onto the coil. The condensed water then drips into the condensate pan and then flows outside of the system.

However, things can go wrong. Most commonly, evaporator coils start to leak because of corroded copper tubing. More precisely, this can happen as a result of formic acid accumulating on the evaporator coil after interacting with copper, water, and volatile organic compounds (VOCs) found in the air inside your home.

Additionally, vibrations from your air conditioners can cause the aluminum fins to create holes in the copper tubing. This often happens with old air conditioners. To fix the issue, homeowners often have to have their evaporator coil replaced entirely, as repairing it is often not an option.

How do I know if my evaporator is leaking?

There are two most common symptoms of corroded and leaking evaporator coils:

  • Your AC is taking longer to cool down the air and the airflow is weaker than it normally is.
  • You need frequent refrigerant fill-ups. Your air conditioner doesn’t consume refrigerant, which means that you shouldn’t normally need it filled up. If this is the case, your evaporator coil may be corroded.

In either of these two cases, the best course of action would be to contact reliable HVAC technicians to inspect your unit and perform any necessary condenser coil replacements or AC repair. A certified, licensed and insured technician can determine the root cause of your air conditioner’s issue and recommend the best solution. In many cases, an AC diagnostic or maintenance check-up reveals a completely different problem than the one the homeowner suspects. To avoid expensive repairs, it is advisable to have your unit inspected and serviced at least once a year.

How do I stop my AC coil from leaking?

If you’ve determined your air conditioner has a leaky evaporator coil, there are three main solutions you can choose from:

1. Temporary fix: keep adding refrigerant.

While you can keep your air conditioner in good working condition by adding more refrigerant, this is only a temporary fix and the most expensive in the long term. What’s more, it can cause additional internal damage to the system, resulting in more expensive repairs. This solution could be the right choice if you plan to sell your home soon or want an affordable, short-term fix.

2. Try using a sealant

Another option is to add sealant to prevent and repair leaks in your air conditioning system. This includes your AC’s evaporators, condensers, soldered joints, and copper lines. This sealant is designed to travel through the coils with the refrigerant seeking leaks and sealing them. This solution can be a good option, but the chance of success is about 50-50 for small or moderate leaks and multiple applications may be needed.

3. Replace the evaporator coil

If your air conditioner coil is covered by warranty, this is by far the best choice out of the three. However, even if this isn’t the case, paying more for a new evaporator coil now will minimize the risk of expensive repairs later on. Not only that but a new evaporator coil will also improve your ACs efficiency and reduce your energy costs.

How much does it cost to replace an AC coil?

The question of whether your air conditioner is under warranty or not will have a direct influence on the cost. If the evaporator coil is under warranty, you are likely to pay about $1,300 for a replacement. If not, the price can range up to $3,000 depending on the manufacturer and your choice of HVAC technicians for the installation.

Since evaporator coils that aren’t covered by warranty can get quite expensive, many contractors recommend getting a new unit if the evaporator coil breaks down. Also, it is important to keep in mind that corroded evaporator coils can be prevented with regular maintenance, just like many other common issues with air conditioners. This is just one of the benefits of investing in yearly or bi-yearly AC tune-ups for your home.

Choose the best air conditioning service in Corona and the surrounding area

How do I know if my evaporator is leaking If you suspect that your AC evaporator coil might be corroded, make sure to contact a dependable HVAC repair and installation company serving Corona and the rest of Riverside County. This holds true for many other issues, as well, including clogged AC drain pans and indoor unit water leaks. These problems can cause unnecessary damage to your cooling system and result in avoidable repairs.

At Action Air Conditioning Heating and Solar, we strive to provide our community’s home and business owners with high-efficiency cooling and heating systems, in addition to ensuring existing units work optimally. To achieve this, we offer comprehensive maintenance and AC tune-up services that keep your system running like new. For AC repairs, our professional technicians take time to carefully detect issues and perform necessary remedies or replacements, always relying on industry-leading techniques.

No matter the type of AC concern you may have, let our team bring reliable and efficient services to your home or business. Get in touch with us today with any questions.

Problems With the Furnace Transformer: What You Should Know

What causes a furnace transformer to blow Your home furnace has a transformer that regulates your home’s voltage to accommodate the system’s power output. Just like any other component of an HVAC system, your furnace transformer may fail and cause problems with the functioning of your unit.

If you suspect that your furnace transformer has broken down and wonder if you should begin searching for the best furnace repair company in San Diego, it would be a good idea for you to get an idea of its overall purpose in your furnace. In this article, we will explain what the transformer is, how it works, and what may cause it to break down.

What is a furnace transformer?

A furnace transformer is a device designed to decrease or increase the voltage of an alternating current (AC) to make it suitable for use in your heating system. It transfers electrical energy from a circuit to another using electromagnetic induction. The main role of a transformer in a furnace is to regulate the incoming voltage to meet the system’s requirements. Depending on the amount of power needed by the furnace, the transformer can diminish or amplify the electricity usage. In an HVAC system, the transformer is typically located inside your furnace, but it may be located in your outdoor AC unit in some cases.

What causes a furnace transformer to blow?

Your furnace transformer may fail due to several reasons, including the following:

  • Faulty contractor: a bad contractor is one of the most common causes of a blown transformer. This is because a faulty contractor can put the entire system under stress, causing the transformer to blow once the tension becomes too much.
  • Wiring problems: if there are loose cables or wires inside your transformer, they may cause a short circuit, frying the transformer.
  • Power surges: similarly, a power surge may also cause your transformer to blow, resulting in problems with the entire unit.

How do I know if my furnace transformer is bad?

If you suspect that your HVAC transformer is faulty, you may want to look out for the following signs and symptoms.

Visual signs

Sometimes, performing a visual inspection of your furnace transformer can help identify issues with the equipment right away. For instance, if you notice any burn marks or bulges along the exterior, it is likely that the transformer needs to be replaced. If you do notice any visual damage, do not try to test the unit yourself. Instead, contact a professional HVAC contractor to inspect your unit and determine the right course of action. If you attempt to test or repair the unit yourself, you may cause the unit to overheat and break down completely.

Vibrating and humming sounds

It is normal to notice a humming sound in your transformer. This is because the iron core or the laminations of the transformer expand and contract, producing a humming sound. However, if you notice a drastic increase in humming accompanied by vibrations, your transformer may be faulty. Also, you should keep in mind that the humming sound may be the result of other issues, such as a faulty furnace capacitor. This is why it’s usually best to have a professional technician inspect your furnace and see what the problem is.

Tripped circuit breaker

If the transformer of your furnace is faulty, it will usually cause the circuit breaker to trip in order to prevent a voltage surge. A surge of voltage may fry various components of your furnace, causing serious damage. If the circuit breaker keeps tripping or if your furnace keeps blowing fuses, the transformer may be the culprit.

Furnace not working properly

If you have a bad transformer, your furnace may not work even with an appropriate power supply. The system does this to protect itself from severe damage caused by electrical issues. Unless you’re an expert, it’s unlikely that you’d be able to confirm with certainty that your furnace is malfunctioning because of a faulty transformer. If you can’t get your furnace to work, make sure to contact a reliable HVAC company to have it inspected.

What happens when a transformer goes bad?

When the transformer in your furnace breaks down, the unit will receive weak power or no power at all. You can check whether there’s power to your unit by turning it off and on again. If there is very little power or none at all, you may need to have the unit replaced or repaired. Alternatively, can also check the voltage points of your furnace. If the voltage is weak or non-existent, there may be several causes, such as a faulty control board.

Can I Replace The Transformer Myself?

Unless you are a qualified and experienced technician who knows a lot about HVAC transformers, you may be able to perform the replacement yourself. If you are a homeowner who has no experience with repairing furnaces, we strongly advise you against attempting to repair or replace the transformer. Think about this: would you rather pay a trained and reliable technician to perform the job according to the latest industry standards? Or would you rather risk damaging your furnace and paying for a new unit? Answering these questions should be enough to help you decide.

Who performs the best furnace repair in San Diego?

What is a furnace transformer Whether you suspect a faulty transformer or wish to have your blower motor checked, make sure to contact Action Air Conditioning, Heating & Solar. With years of experience in the field, our technicians are highly skilled at troubleshooting HVAC systems and resolving both simple and complex issues. If we determine that your unit is past the point of repair, we can recommend the best replacement for your needs and perform the installation following the highest industry standards.

You can depend on our expert technicians no matter where you’re located in San Diego County. We are known for our prompt response and an unrelenting dedication to ensuring our customers’ satisfaction. Contact Action Air Conditioning, Heating & Solar today and maximize your indoor comfort.